| lpc+15/CFU |
| Vendor ID |
419 (0x01a3) |
 |
| Vendor Name |
microsonic GmbH |
| Vendor Text |
Unser Herz schallt ultra. |
| Vendor URL |
https://www.microsonic.de |
| Device ID |
41 (0x000029) |
| DeviceFamily |
lpc+ |
| Features |
| Block Parameter |
yes |
| Data Storage |
yes |
| Profile Characteristic |
0x0001 (Device Profile: Smart Sensor), 0x000a (Device Profile: ?Unknown?), 0x8000 (Function Class: Device Identification), 0x8001 (Function Class: Binary Data Channel), 0x8003 (Function Class: Device Diagnosis), 0x8004 (Function Class: Teach-In Commands), 0x800a (Function Class: ?Unknown?) |
| Supported Access Locks |
Parameter: yes, Data Storage: yes, Local Parameterization: yes, Local User Interface: no |
| Communication |
| IO-Link Revision |
V1.1 |
| Transmission Rate | 38400 bit/s (COM2) |
| Minimum Cycle Time |
8 ms |
| SIO Mode Supported |
yes |
| M-Sequence Capability | PREOPERATE = TYPE_1_2 with 2 octets on-request data OPERATE = TYPE_2_V with 1 octet on-request data ISDU supported |
| Device Variant |
lpc+15/CFU |
| Description |
Ultrasonic sensor in M18 brass sleeve, 1 push-pull switching output, 1 analogue output 0-10 V, 20 - 250 mm measuring range, 20 mm blindzone, 150 mm operating range, temperature compensation |
| Product ID |
36020 |
| Device Icon |
 |
| Device Symbol |
 |
| Connection Type | M12-5 connector |
| Connection Symbol |
 |
| - pin 1 |
brown; L+ |
| - pin 2 |
white; Other; Voltage |
| - pin 3 |
(light) blue; L- |
| - pin 4 |
black; C/Q |
| - pin 5 |
grey (slate); NC; Com |
| Device Variant |
lpc+15/WK/CFU |
| Description |
Ultrasonic sensor in M18 brass sleeve with 90° angled head, 1 push-pull switching output, 1 analogue output 0-10 V, 20 - 250 mm measuring range, 20 mm blindzone, 150 mm operating range, temperature compensation |
| Product ID |
36021 |
| Device Icon |
 |
| Device Symbol |
 |
| Connection Type | M12-5 connector |
| Connection Symbol |
 |
| - pin 1 |
brown; L+ |
| - pin 2 |
white; Other; Voltage |
| - pin 3 |
(light) blue; L- |
| - pin 4 |
black; C/Q |
| - pin 5 |
grey (slate); NC; Com |
| subindex |
bit offset |
data type |
allowed values |
default value |
acc. restr. |
mod. other var. |
excl. from DS |
name |
description |
| 1 |
120 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 1 |
|
| 2 |
112 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 2 |
|
| 3 |
104 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 3 |
|
| 4 |
96 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 4 |
|
| 5 |
88 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 5 |
|
| 6 |
80 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 6 |
|
| 7 |
72 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 7 |
|
| 8 |
64 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 8 |
|
| 9 |
56 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 9 |
|
| 10 |
48 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 10 |
|
| 11 |
40 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 11 |
|
| 12 |
32 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 12 |
|
| 13 |
24 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 13 |
|
| 14 |
16 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 14 |
|
| 15 |
8 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 15 |
|
| 16 |
0 |
8-bit UInteger |
|
|
|
|
|
Device Specific Parameter 16 |
|
| subindex |
bit offset |
data type |
allowed values |
default value |
acc. restr. |
mod. other var. |
excl. from DS |
name |
description |
| 1 |
24 |
8-bit UInteger |
0 = High active, 1 = Low active |
0 |
|
|
|
Logic |
Logic state for target detected |
| 2 |
16 |
8-bit UInteger |
0 = Deactivated, 1 = Single point (SP1: switching point), 2 = Window (SP1, SP2: window mode), 3 = Two point (SP1, SP2: hysteresis mode), 128 = Single point + set point offset (SP1: switching point + offset), 129 = Window ± set point offset (SP1: two way reflective barrier) |
1 |
|
|
|
Mode |
Operation mode of the switch signal channel: switching point, window mode, hysteresis mode, switching point + offset, two way reflective barrier |
| 3 |
0 |
16-bit Integer |
10..2300 |
20 |
|
|
|
Hysteresis |
Hysteresis for SP1 and SP2 |
| subindex |
bit offset |
data type |
allowed values |
default value |
acc. restr. |
mod. other var. |
excl. from DS |
name |
description |
| 1 |
16 |
8-bit UInteger |
0 = F00: no filter, 1 = F01: standard filter, 2 = F02: averaging filter, 3 = F03: foreground filter, 4 = F04: background filter |
1 |
|
|
|
Type |
Measurement filter for the evaluation of the measured values |
| 2 |
8 |
8-bit UInteger |
0 = P00: weak filter, 1 = P01, 2 = P02, 3 = P03, 4 = P04, 5 = P05, 6 = P06, 7 = P07, 8 = P08, 9 = P09: strong filter |
0 |
|
|
|
Strength |
Strength of the chosen measurement filter |
| 3 |
0 |
8-bit Integer |
10..25 |
25 |
|
|
|
Maximum object speed |
Maximum object speed for a movement towards and away from the sensor. Valid (only) for type F01 and F02. |
| subindex |
bit offset |
data type |
allowed values |
default value |
acc. restr. |
mod. other var. |
excl. from DS |
name |
description |
| 1 |
16 |
8-bit UInteger |
0 = Inactive, 1 = Active |
1 |
|
|
|
Mode |
|
| 2 |
8 |
8-bit UInteger |
0 = Synchronisation active, 1 = Multiplex address 1, 2 = Multiplex address 2, 3 = Multiplex address 3, 4 = Multiplex address 4, 5 = Multiplex address 5, 6 = Multiplex address 6, 7 = Multiplex address 7, 8 = Multiplex address 8, 9 = Multiplex address 9, 10 = Multiplex address 10, 128 = IO-Link synchronisation active |
0 |
|
|
|
Sensor operation |
|
| 3 |
0 |
8-bit UInteger |
2 = 2 participants, 3 = 3 participants, 4 = 4 participants, 5 = 5 participants, 6 = 6 participants, 7 = 7 participants, 8 = 8 participants, 9 = 9 participants, 10 = 10 participants |
10 |
|
|
|
Multiplex number of participants |
Maximum number of multiplex participants should be adjusted to correct number of participants in order to speed up multiplex operation. |
| Observation Menu |
| SSC1: switch signal channel 1 - pin 4 (push-pull) |
| V_SSC1Param.SP1 * 0.1 + 0 mm, ro Dec.1 |
| V_SSC1Param.SP2 * 0.1 + 0 mm, ro Dec.1 |
| V_SSC1Config.Logic, ro |
| V_SSC1Config.Mode, ro |
| V_SSC1Config.Hysteresis * 0.1 + 0 mm, ro Dec.1 |
| V_SSC1AdvancedConfig.Switch-on delay * 0.1 + 0 s, ro Dec.1 |
| V_SSC1AdvancedConfig.switch-off delay * 0.1 + 0 s, ro Dec.1 |
| V_SSC1AdvancedConfig.Set point offset * 1 + 0 %, ro Dec.0 |
|
| ASC1: analogue signal channel 1 - pin 2 (voltage) |
| V_ASC1Param.SP1 * 0.1 + 0 mm, ro Dec.1 |
| V_ASC1Param.SP2 * 0.1 + 0 mm, ro Dec.1 |
| V_ASC1Config.Output characteristic, ro |
|
| Measurement configuration |
| V_Messkonfig.Foreground suppression * 0.1 + 0 mm, ro Dec.1 |
|
| Filter |
| V_Filter.Type, ro |
| V_Filter.Strength, ro |
| V_Filter.Maximum object speed * 0.1 + 0 m/s, ro Dec.1 |
|
| Temperature compensation |
| V_TempKomp.Source of temperature, ro |
| V_TempKomp.Reference temperature * 1 + 0 °C, ro Dec.0 |
|
| Synchronisation and multiplex operation |
| V_SyncMux.Mode, ro |
| V_SyncMux.Sensor operation, ro |
| V_SyncMux.Multiplex number of participants, ro |
|
| User interface |
| V_BedienungEingabe.Mode, ro |
| V_BedienungAusgabe.Mode, ro |
|
| Temperature compensation diagnosis |
| V_DiagnoseTemperatur.Sensor temperature * 0.1 + 0 °C, ro Dec.1 |
| V_DiagnoseTemperatur.Heating-up phase, ro |
|
| Measurement data channel description |
| V_MDCDescriptor.Lower limit * 0.1 + 0 mm, ro Dec.1 |
| V_MDCDescriptor.Upper limit * 0.1 + 0 mm, ro Dec.1 |
| V_MDCDescriptor.Unit code, ro |
| V_MDCDescriptor.Scale, ro |
|
| ProcessDataInput |
| V_ProcessDataInput.1 * 0.1 + 0 mm, ro Dec.1 |
| V_ProcessDataInput.2, ro Dec.0 |
| V_ProcessDataInput.3, ro |
| V_ProcessDataInput.4, ro |
|
| Parameter Menu |
| Teach-in channel |
| V_SystemCommand, Button:=65 |
| V_SystemCommand, Button:=66 |
| V_TeachInChannel |
| V_TeachInStatus |
|
| SSC1: switch signal channel 1 - pin 4 (push-pull) |
| V_SSC1Param.SP1 * 0.1 + 0 mm, rw Dec.1 |
| V_SSC1Param.SP2 * 0.1 + 0 mm, rw Dec.1 |
| V_SSC1Config.Logic, rw |
| V_SSC1Config.Mode, rw |
| V_SSC1Config.Hysteresis * 0.1 + 0 mm, rw Dec.1 |
| V_SSC1AdvancedConfig.Switch-on delay * 0.1 + 0 s, rw Dec.1 |
| V_SSC1AdvancedConfig.switch-off delay * 0.1 + 0 s, rw Dec.1 |
| V_SSC1AdvancedConfig.Set point offset * 1 + 0 %, rw Dec.0 |
|
| ASC1: analogue signal channel 1 - pin 2 (voltage) |
| V_ASC1Param.SP1 * 0.1 + 0 mm, rw Dec.1 |
| V_ASC1Param.SP2 * 0.1 + 0 mm, rw Dec.1 |
| V_ASC1Config.Output characteristic, rw |
|
| Measurement configuration |
| V_Messkonfig.Foreground suppression * 0.1 + 0 mm, rw Dec.1 |
|
| Filter |
| V_Filter.Type, rw |
| V_Filter.Strength, rw |
| V_Filter.Maximum object speed * 0.1 + 0 m/s, rw Dec.1 |
|
| Temperature compensation |
| V_TempKomp.Source of temperature, rw |
| V_TempKomp.Reference temperature * 1 + 0 °C, rw Dec.0 |
|
| Synchronisation and multiplex operation |
| V_SyncMux.Mode, rw |
| V_SyncMux.Sensor operation, rw |
| V_SyncMux.Multiplex number of participants, rw |
|
| User interface |
| V_BedienungEingabe.Mode, rw |
| V_BedienungAusgabe.Mode, rw |
|
| System command |
| V_SystemCommand, Button:=130 |
|
| Device access locks |
| V_DeviceAccessLocks.Parameter (write) Access Lock, rw |
| V_DeviceAccessLocks.Data Storage Lock, rw |
| V_DeviceAccessLocks.Local Parameterization Lock, rw |
|
| Observation Menu |
| Temperature compensation diagnosis |
| V_DiagnoseTemperatur.Sensor temperature * 0.1 + 0 °C, ro Dec.1 |
| V_DiagnoseTemperatur.Heating-up phase, ro |
|
| Measurement data channel description |
| V_MDCDescriptor.Lower limit * 0.1 + 0 mm, ro Dec.1 |
| V_MDCDescriptor.Upper limit * 0.1 + 0 mm, ro Dec.1 |
| V_MDCDescriptor.Unit code, ro |
| V_MDCDescriptor.Scale, ro |
|
| ProcessDataInput |
| V_ProcessDataInput.1 * 0.1 + 0 mm, ro Dec.1 |
| V_ProcessDataInput.2, ro Dec.0 |
| V_ProcessDataInput.3, ro |
| V_ProcessDataInput.4, ro |
|
| Parameter Menu |
| Teach-in channel |
| V_SystemCommand, Button:=65 |
| V_SystemCommand, Button:=66 |
| V_TeachInChannel |
| V_TeachInStatus |
|
| SSC1: switch signal channel 1 - pin 4 (push-pull) |
| V_SSC1Param.SP1 * 0.1 + 0 mm, rw Dec.1 |
| V_SSC1Param.SP2 * 0.1 + 0 mm, rw Dec.1 |
| V_SSC1Config.Logic, rw |
| V_SSC1Config.Mode, rw |
| V_SSC1Config.Hysteresis * 0.1 + 0 mm, rw Dec.1 |
| V_SSC1AdvancedConfig.Switch-on delay * 0.1 + 0 s, rw Dec.1 |
| V_SSC1AdvancedConfig.switch-off delay * 0.1 + 0 s, rw Dec.1 |
| V_SSC1AdvancedConfig.Set point offset * 1 + 0 %, rw Dec.0 |
|
| ASC1: analogue signal channel 1 - pin 2 (voltage) |
| V_ASC1Param.SP1 * 0.1 + 0 mm, rw Dec.1 |
| V_ASC1Param.SP2 * 0.1 + 0 mm, rw Dec.1 |
| V_ASC1Config.Output characteristic, rw |
|
| Measurement configuration |
| V_Messkonfig.Foreground suppression * 0.1 + 0 mm, rw Dec.1 |
|
| Filter |
| V_Filter.Type, rw |
| V_Filter.Strength, rw |
| V_Filter.Maximum object speed * 0.1 + 0 m/s, rw Dec.1 |
|
| Temperature compensation |
| V_TempKomp.Source of temperature, rw |
| V_TempKomp.Reference temperature * 1 + 0 °C, rw Dec.0 |
|
| Synchronisation and multiplex operation |
| V_SyncMux.Mode, rw |
| V_SyncMux.Sensor operation, rw |
| V_SyncMux.Multiplex number of participants, rw |
|
| User interface |
| V_BedienungEingabe.Mode, rw |
| V_BedienungAusgabe.Mode, rw |
|
| System command |
| V_SystemCommand, Button:=130 |
|
| Device access locks |
| V_DeviceAccessLocks.Parameter (write) Access Lock, rw |
| V_DeviceAccessLocks.Data Storage Lock, rw |
| V_DeviceAccessLocks.Local Parameterization Lock, rw |
|
| Observation Menu |
| Temperature compensation diagnosis |
| V_DiagnoseTemperatur.Sensor temperature * 0.1 + 0 °C, ro Dec.1 |
| V_DiagnoseTemperatur.Heating-up phase, ro |
|
| Measurement data channel description |
| V_MDCDescriptor.Lower limit * 0.1 + 0 mm, ro Dec.1 |
| V_MDCDescriptor.Upper limit * 0.1 + 0 mm, ro Dec.1 |
| V_MDCDescriptor.Unit code, ro |
| V_MDCDescriptor.Scale, ro |
|
| ProcessDataInput |
| V_ProcessDataInput.1 * 0.1 + 0 mm, ro Dec.1 |
| V_ProcessDataInput.2, ro Dec.0 |
| V_ProcessDataInput.3, ro |
| V_ProcessDataInput.4, ro |
|
Note: This page shows the content of an IODD file transformed into HTML format. In the case of disparity between this and the XML view, the content of the XML file takes precedence.
Created by IODD Viewer V1.1.