-
2 x Push-Pull
叉型
IO-Link
标签/接头检测
标签/接头检测
Flat fork leg
Mounting adapter for 2 mounting positions
Swivelling M12 connector
IO-Link
Recipe management
Measurement cycle time ≥ 150 µs to 2 ms (depending on material)
Mounting adapter for 2 mounting positions
Swivelling M12 connector
IO-Link
Recipe management
Measurement cycle time ≥ 150 µs to 2 ms (depending on material)
脉冲操作带有振幅估算
500 kHz
20 - 30 V d.c.,反极性保护
± 10 %
≤ 50 mA
5芯M12接插件
卷材中断
Push-Pull, UB-1 V, -UB+1 V, Imax = 100 mA
常开/常闭，可调节，短路保护
Push-Pull, UB-1 V, -UB+1 V, Imax = 100 mA
常开/常闭，可调节，短路保护
检测到标签/接头
Push-Pull, UB-1 V, -UB+1 V, Imax = 100 mA
常开/常闭，可调节，短路保护
Push-Pull, UB-1 V, -UB+1 V, Imax = 100 mA
常开/常闭，可调节，短路保护
≥ 260 µs
< 300 ms
com端输入
自学习输入
自学习输入
esf+1/CFF/Pro
16955
是
COM3 (230.4 kBaud)
600 µs
32 Bit PDI
Bit 0: initial state Pin 4; Bit 1: initial state Pin 2; Bit 2-7: evaluation; Bit 8-15: scale (Int. 8); Bit 16-31: measured value (Int. 16)
Identification, measurement, evaluation, switching output, operating mode, operation, measurement history, diagnostics, recipe memory, counters, add-ons
SP Teach-in, Locator, Reset device, Reset application, Factory settings, Back-to-box, Measurement recording, Reset counters, Teach-in transmitter/receiver distance, Reset diagnostic data
是
IODD Version 1.1.5
6 mm
68 mm
PA-GF50
泡沫聚氨酯，玻璃填充的环氧树脂
IP 65
+5°C至 +60°C之间
-40°C 到 +85°C
60 g
1 push-button
com input
com input
Teach-in via push-button
Teach-in via com input on pin 5
LCA-2 with LinkControl
IO-Link
Teach-in via com input on pin 5
LCA-2 with LinkControl
IO-Link
是
1 x LED green: power, 1 x LED yellow: output, 1 x LED red: error
Flat fork leg
Mounting adapter for 2 mounting positions
Swivelling M12 connector
IO-Link
Recipe management
Measurement cycle time ≥ 150 µs to 2 ms (depending on material)
Mounting adapter for 2 mounting positions
Swivelling M12 connector
IO-Link
Recipe management
Measurement cycle time ≥ 150 µs to 2 ms (depending on material)