Archive sensor
dbk-4/Empf/CD/O/M18/ K3K1

Downloads

Page content as online catalogue

please inquire
  • 1 x pnp 1 x pnp
cylindrical M18
double sheet control
papers with weights of 20 - 1,200 g/m2, metal-laminated sheets and films up to 0.4 mm thick, self-adhesive films, sheet metals up to 0.3 mm thick, fine corrugated card
receiver für ultrasonic-double sheet control
long connection cable

Technical Data - Mechanics

40 mm ± 3 mm
± 45° from the perpendicular to the sheet

Ultrasonic-Specific

pulse operation with amplitude evaluation
400 kHz
7 mm in front of transmitter and receiver

Electrical Data

20 - 30 V d.c., reverse polarity protection
± 10 %
≤ 35 mA
3 m PVC cable, 4 x 0.34 mm2
1.2 m PVC cable with 2-pin plug IP 20

outputs

double sheet output
pnp: Imax = 500 mA (UB-2V)
NCC, short-circuit-proof
6.5 ms in trigger mode, 24,5 ms in free-run mode

Inputs

control input

response times

40 ms, resp. state frozen until next enable in trigger mode, 160 ms in the free-run mode

control

If the control input is pulled against +UB or -UB (UE < 0.1 x UB or UE > 0.9 x UB), then the dbk is deactivated; the switched output state before deactivation is frozen. The effect of the control input being triggered (0.3 x UB < UE < 0.7 x UB (IE ≤ 100 µs) or the control input being opened is for the dbk to start its measurements at a 6.5 ms response time (trigger mode).
The dbk continues to measure (free-run mode) at a 6.5 ms response time should it not again be deactivated. After 500 ms the response time in the free-run mode goes down to 24.5 ms and stays there.

housing

brass sleeve, nickel-plated, plastic parts, PBT
polyurethane foam, epoxy resin with glass contents
IP 65
+5°C to +60°C
-40°C to +85°C
190 g
15 Nm
dbk-4/Empf/CD/O/ M18
different cable length

Technical Features/Characteristics

not necessary
not necessary
1 x Duo-LED; green: working / red: double sheet
receiver für ultrasonic-double sheet control
long connection cable

Accessories

dbk-Testbogen
BF-18

ACCESSORIES

prev
next
Details zu LCA-2
LCA-2

LCA-2

For the convenient setting of a large number of microsonic sensor families. The LinkControl-Adapter LCA-2 can be used to read, copy or write parameters. Additionally, you can connect it with a PC in order to configurate it via LinkControl Software.
Details zu LCA-2 Koffer
LCA-2 Koffer

LCA-2 Koffer

Set for convenient setting of a number of microsonic sensor families.
Contents:
LCA-2
- Adaptor for sensors with cable connection (lcs) incl. cable clamps
- Adapter for power supply incl. cable clamps
- Power supply 90-240VAC/24VDC, 625 mA, with 2,5 m cable
- four exchangeable AC-plugs for use in Europe, USA, Great Britain and Australia
- USB - cable A-plug to B-plug
- USB stick with LinkControl software
- Manual (German / English)
Details zu UF-90/M18
UF-90/M18

UF-90/M18

beam deflector for sensors with M18 threaded sleeve and ≤ 0.35 m detection range
Details zu UF-90/M30
UF-90/M30

UF-90/M30

beam detector for sensors with M30 threaded sleeve and ≤ 1.3 m detection range
Details zu BF-18
BF-18

BF-18

fastening clamp for sensors with M18 threaded sleeve
Details zu BF-30
BF-30

BF-30

fastening clamp for sensors with M30 threaded sleeve
Details zu MW-ZWS 2
MW-ZWS 2

MW-ZWS 2

mounting bracket for zws-7/-15/-24 sensors
Details zu MW-ZWS 3
MW-ZWS 3

MW-ZWS 3

mounting bracket for zws-7/-15/-24 sensors
Details zu MW-LCS 1
MW-LCS 1

MW-LCS 1

adapter plate for lcs sensors from 2007 year of manufacture - for using the fixing holes of the predecessor model
Details zu M18x1
M18x1

M18x1

fixing nut M18x1
Details zu KST5A-2/M12
KST5A-2/M12

KST5A-2/M12

cable, 5 contacts, female angled connector M12, cable length 2 m
Details zu KST5A-5/M12
KST5A-5/M12

KST5A-5/M12

cable, 5 contacts, female angled connector M12, cable length 5 m
Details zu KST5A-10/M12
KST5A-10/M12

KST5A-10/M12

cable, 5 contacts, female angled connector M12, cable length 10 m

Recently Viewed

prev
next