sks 센서
sks 센서들은 마이크로 소닉에서 가장 작은 초음파 센서이고 특별한 하우징 설계는 zws 센서 들에 비교하여 33%까지 감소하였습니다.
sks
The smallest of its kind: The sks sensor in cubical housing.
Detection ranges:
0.15 m
Outputs:
하이라이트
- Very small housing dimensions with two M3 threaded sleeves
- Installation-compatible with many optical sensors a true alternative for critical applications
- IO-Link interfacefor support of the new industry standard
- Smart Sensor Profiles more transparency between IO-Link Devices
- Optionally with SoundPipe sks1 waveguide attachment
- Improved temperature compensation adjustment to working conditions within 45 seconds
- 캐나다 및 미국 안전 표준에 대한 UL 인증
기본 사항
- 1 switching output in pnp or npn variant
- 1 Push-Pull switching output pnp or npn basis
- Analogue output 4-20 mA or 0-10 V
- microsonic Teach-in using a button
- 0.1 mm resolution
- 20–30 V operating voltage
Sensor matrix
The sensor matrix gives an overview of standard sensors from sks family. Make your choice based on operating range and available outputs and click in the matrix.
0.15 미터
1 Schaltausgang IO-Link
1 Schaltausgang
1 Analogausgang
1 Schaltausgang IO-Link
1 Schaltausgang
1 Analogausgang
The miniature housing of the sks ultrasonic sensor fits in constricted installation locations e.g. for sampling conductor boards and wafer in the electronics industry, for presence checks on conveyor bands or fill-level measurement in small containers. When capacitive or optical sensors come up against their physical limits, installation compatibility of ultrasonic sensors with many optical sensors enable their deployment: simply secured with two M3 screw sockets.
For the sks sensor family
three output versions are available:
1 Push-Pull switching output with IO-Link interface
1 switching output, optionally in pnp- or npn-circuitry
1 analogue output 4–20 mA or 0–10 VThe temperature compensation
of the analogue sensors profits from a significant improvement. The sensors reach their operating point only 45 seconds after activation of the operating voltage. We now compensate for the influence of self-heating and installation conditions. This brings improved precision shortly after activation of the supply voltage and in running operation.
The Teach-in button
on the top of the sensor allows for the convenient configuration of the desired switching distance and operating mode.
두개의 LED
2개의 LED는 센서의 동작 상태를 표시하여 줍니다.
스위칭 출력이 있는 큐브 센서에는 세 가지 작동 모드가 있습니다.
- 단일 스위칭 포인트
- 양방향 반사 장벽
- 윈도우 모드
The switching output is set by
positioning the object to be detected within the desired distance (1) to the sensor, pressing the button for approx. 3 seconds and then pressing it once more for approx. 1 second. Ready.
A two-way reflective barrier
can be set up with the help of a permanently mounted reflector by mounting the sks sensor and the reflector. Then press the button for approx. 3 seconds and then pressing it once more for approx. 10 seconds. Now, the two-way reflective barrier has been set.
고정 장착된 반사경이 있는 2방향 반사 장벽의 티치-인
- 버튼 T2를 약 3초간 누릅니다.
- 그런 다음 버튼 T2를 다시 약 10초간 누릅니다.
Set the analogue output
by initally positioning the object to the detected on the sensor-close window limit (1), pressing the button for approx. 3 seconds, shifting the object to the sensor-distant window limit and pressing the button once more for approx. 1 second. Ready.
To set a window
with 2 switching points, proceed in the same way as for an analogue output.
NCC/NOC
증가/감소 아나로그 구간을 pin2를 통해 세트할수 있다.
SoundPipe sks1
intensively bundles the sound field and allows measurements in openings with small diameters. The SoundPipe sks1 (accessory) is pushed on the transducer of the sks.
IO-Link integrated
in version 1.1 for sensors with Push-Pull output. The sks-15/CF/A supports the Smart Sensor Profile.
특별한 요구 사항이 있습니까?
우리와 함께, 당신은 개별 솔루션을 쉽게 찾을 수 있습니다. 이것처럼 간단한 일은 없습니다.
당신의 어플리케이션에 대하여 말씀해 주십시오: +49 231 97 51 51-82.
