cube ultrasonic sensors – easy installation: no tools required thanks to QuickLock mounting bracket.
0.35 m
1.3 m
3.4 m
The sensor matrix gives an overview of standard sensors from cube family. Make your choice based on operating range and available outputs and click in the matrix.
0,35 м1,3 м3,4 м
are designed in a cubic housing for demanding applications. The cube is available with the QuickLock mounting bracket. This allows the sensor to be mounted quickly and easily.
The cube can be easily turned in 5 positions thanks to the rotating sensor head. The convenient mounting allows flexible use in numerous applications.
show all operating states in any mounting position. The sensor status is therefore clearly visible at all times.
1 Push-Pull switching output in pnp- or npn-circuitry
1 Push-Pull switching output and 1 analogue output or switchable to 2. switching outputWith LinkControl or IO-Link, the analogue output can be deactivated and a second Push-Pull switching output activated instead. The second switching output could be used in level monitoring, for example, to control the overflow.
the sensor can be optimally aligned to the object during installation.
the cube sensors can be be easily set (microsonic Teach-in).
cube ultrasonic sensors support IO-Link in version 1.1.2 as well as Smart Sensor Profile.
is suitable for applications, in which the actual distance to the object is also the switching point. A typical application is level control, where the ultrasonic sensor detects the filling level vertically from above during the filling process. The taught switching point corresponds to the maximum filling level.
is recommended by objects, which move into the detection area from the side. In this case the switching distance is set 8 % further than the actual measured distance to the object. This ensures a reliable switching distance even if the height of the objects varies slightly.
with a fixed mounted reflector
and rising/falling analogue characteristics can also be set via the buttons.
permits comprehensive parameterisation of cube ultrasonic sensors via the LinkControl-Adapter LCA-2 which connects the sensors to the PC.
If several cube ultrasonic sensors are operated in one application, the can be synchronised via pin 5 to prevent.
If more than 10 sensors must be synchronised, this can be carried out with the SyncBox1, which is available as an accessory. Synchronisation via pin 5 is also possible in IO-Link mode.
