sks-15/CF/A

IO-Link
Bild vom sks Ultraschallsensor
  • 1 x Push-Pull 1 x Push-Pull
  • 250 mm 250 mm
20 - 250 mm
cuboidal
IO-Link
proximity switch/reflective mode
reflective barrier
window mode
kleinste quaderförmige Bauform
schlankes Schallfeld
IO-Link
Smart Sensor Profile
UL Listed

Ultrasonic-Specific

echo propagation time measurement
380 kHz
20 mm
150 mm
250 mm
0.10 mm
± 0.15 %
± 1 % (temperature drift internally compensated)

Electrical Data

10 - 30 V d.c., reverse polarity protection
± 10 %
≤ 30 mA
4-pin M8 initiator plug

Outputs

switching output
Push-Pull, UB-3 V, -UB+3 V,Imax = 100 mA
2.0 mm
25 Hz
32 ms
< 300 ms

Inputs

control input

Housing

ABS
polyurethane foam, epoxy resin with glass contents
IP 67
-25°C to +70°C
-40°C to +85°C
8 g

Technical Features/Characteristics

yes
1 push-button
Teach-in via push-button
IO-Link
no
no
1 x LED green: working, 1 x LED yellow: switch status
kleinste quaderförmige Bauform
schlankes Schallfeld
IO-Link
Smart Sensor Profile
UL Listed

IO-Link

sks-15/CF/A
13009
yes
COM2 (38,4 kBaud)
8 ms
32 Bit PDI
Bit 0: initial state Pin 4; Bit 8-15: scale (Int. 8); Bit 16-31: measured value (Int. 16)
Identification, switched output, filter, temperature compensation, operation
SP1 Teach-in, SP2 Teach-in, factory settings
yes
IODD version 1.1

Matching sensors

prev
next
Details zu KST4A-2/M8
KST4A-2/M8

KST4A-2/M8

cable, 4 contacts, female angled connector M8, cable length 2 m
Details zu KST4A-5/M8
KST4A-5/M8

KST4A-5/M8

cable, 4 contacts, female angled connector M8, cable length 5 m
Details zu KST4G-2/M8
KST4G-2/M8

KST4G-2/M8

cable, 4 contacts, female cable connector M8, cable length 2 m
Details zu KST4G-5/M8
KST4G-5/M8

KST4G-5/M8

cable, 4 contacts, female cable connector M8, cable length 5 m
Details zu SoundPipe sks1
SoundPipe sks1

SoundPipe sks1

SoundPipe for sks ultrasonic sensors. SoundPipe sks1 intensively bundles the sound field and allows measurements in drill holes and openings with small diameters. Push the SoundPipe down on the transducer until it is flush with the sensor housing. Avoid axial tensile force on the SoundPipe, otherwise the SoundPipe may dismantle from the sks sensor.

Recently Viewed

prev
next