Auf dem Foto sind die mic Ultraschallsensoren in den fünf verschiedenen Tastweiten zu sehen.

mic

모든 메탈 mic 센서들은 다섯 가지의 검출 영역을 갖은 두 가지 디자인으로 가능합니다.

검출 영역
  • Symbolische Darstellung eines Ultraschallsensor mit einer Tastweite von 0,25 m.0.25 m
  • Symbolische Darstellung eines Ultraschallsensor mit einer Tastweite von 0,35 m.0.35 m
  • Symbolische Darstellung eines Ultraschallsensor mit einer Tastweite von 1,3 m.1.3 m
  • Symbolische Darstellung eines Ultraschallsensor mit einer Tastweite von 3,4 m.3.4 m
  • Symbolische Darstellung eines Ultraschallsensor mit einer Tastweite von 6,0 m.6.0 m
출력
  • Symbolische Darstellung 1 Schaltausgang
  • Symbolische Darstellung von einem Analogausgang
하우징 규격

하이라이트

  • M30 housing and M12 circular connector in metal design for harsh usage conditions
  • Automatic synchronisation for simultaneous operation of up to ten sensors in close quarters
  • 캐나다 및 미국 안전 표준에 대한 UL 인증

Basics

  • 1 switching output in pnp variant
  • Analogue output 4–20 mA and 0–10 V with automatic switching between current and voltage outputs
  • 5 detection ranges with a measurement range of 30 mm to 8 m
  • microsonic Teach-in on pin 5
  • 0.18 mm to 2.4 mm resolution
  • Temperature compensation
  • 9~30V 작동 전압
  • 링크컨트롤(LinkControl) PC로 센서를 환경설정

sensor matrix

The sensor matrix provides an overview of the standard range of the mic sensor family. Select the desired operating range and available outputs by clicking on the matrix.

매우 튼튼한 구조

M12원형 콘넥터에 M30 전부 메탈하우징으로 되어있다. 센서에 모든 운용요소 및 신호램프등이 포함되어 있지않고 기계적 강도가 높은 하우징과 플러그 콘넥터를갖추고 있어서 극한환경 조건에서 사용하기 적합합니다.센서는 30mm 측정영역부터 다섯분류의 측정영역에서 유용합니다.

M12-Rundsteckverbinder in Metallausführung (links) und Einsatz unter rauen Bedingungen (rechts)
M12 metal circular connector (left) and operation under rough conditions (right)

두가지 출력 레벨

모든 다섯 측정영역에서 유용합니다.

Symbolische Darstellung 1 Schaltausgang1 pnp switching output
Symbolische Darstellung von einem Analogausgang1 analogue output 4–20 mA and 0–10 V

NCC/NOC

증가/감소 아나로그 구간을 pin5를 통해 세트할수 있다.

Synchronisation

permits the simultaneous use of multiple mic sensors in an application. To avoid mutual interference, the sensors can be synchronised with one another. To do this, all the sensors are electrically connected on pin 5.

If more than 10 sensors need to be synchronised, this can be carried out with the SyncBox1 , which is available as an accessory.

LinkControl

optionally permits the extensive parameterisation of mic sensors. The LCA-2 LinkControl adapter, which is available as an accessory, can be used to connect mic sensors to the PC.

Sensor über LCA-2 für die Programmierung am PC angeschlossen
LCA-2를 통해 프로그래밍을 위하여 PC에 연결된 센서.
특별한 요구 사항이 있습니까?

우리와 함께, 당신은 개별 솔루션을 쉽게 찾을 수 있습니다. 이것처럼 간단한 일은 없습니다.

당신의 어플리케이션에 대하여 말씀해 주십시오: +49 231 97 51 51-82.