Auf dem Foto sind die mic Ultraschallsensoren in den fünf verschiedenen Tastweiten zu sehen.

mic

These completely metal mic sensors are available in two device designs with five different detection ranges.

Detection ranges:

0.25 m
0.35 m
1.3 m
3.4 m
6.0 m

Outputs:

Threaded sleeve:

Download sensor details Sensor matrix

Highlights

M30 housing and M12 circular connector in metal design for harsh usage conditions
Automatic synchronisation for simultaneous operation of up to ten sensors in close quarters
UL Listed to Canadian and US safety standards

Basics

1 switching output in pnp variant
Analogue output 4–20 mA and 0–10 V with automatic switching between current and voltage outputs
5 detection ranges with a measurement range of 30 mm to 8 m
microsonic Teach-in on pin 5
0.18 mm to 2.4 mm resolution
Temperature compensation
9–30 V operating voltage
LinkControlfor configuration of sensors from a PC

sensor matrix

The sensor matrix provides an overview of the standard range of the mic sensor family. Select the desired operating range and available outputs by clicking on the matrix.

0.25 m

0.35 m

1.3 m

3.4 m

6.0 m

1 Schaltausgang

1 x pnpmic-25/D/M

1 x pnpmic-35/D/M

1 x pnpmic-130/D/M

1 x pnpmic-340/D/M

1 x pnpmic-600/D/M

1 Analogausgang

1 x analog 4-20 mAmic-25/IU/M

1 x analog 4-20 mAmic-35/IU/M

1 x analog 4-20 mAmic-130/IU/M

1 x analog 4-20 mAmic-340/IU/M

1 x analog 4-20 mAmic-600/IU/M

1 Schaltausgang

1 x pnp

1 Analogausgang

1 x analog 4-20 mA

is fully made of metal from the M30 housing to the M12 circular connector. Since the sensors do not contain any operating elements or signal lamps, they are especially suited for application under extreme ambient conditions with high mechanical loads for housing and plug connector. The sensors are available in five detection ranges and cover a measuring range of 30 mm up to 8 m.

M12-Rundsteckverbinder in Metallausführung (links) und Einsatz unter rauen Bedingungen (rechts) — M12 metal circular connector (left) and operation under rough conditions (right)

are available for all five detection ranges:

1 pnp switching output

Symbolische Darstellung von einem Analogausgang

1 analogue output 4–20 mA and 0–10 V

Single switching point
Two-way reflective barrier
Window mode

Place object to be detected (1) at the desired distance
Apply +U_B to pin 5 for about 3 seconds
Then apply +U_B to pin 5 again for about 1 second

Teach-in of a two-way reflective barrier ultrasonic sensor — Teach-in of a two-way reflective barrier

with a fixed reflector

Apply +U_B to pin 5 for about 3 seconds
Then apply +U_B to pin 5 again for about 10 seconds

Place object at the near edge of the window (1)
Apply +U_B to pin 5 for about 3 seconds
Then move the object to the far edge of the window (2)
Then apply +U_B to pin 5 again for about 1 seconds

and rising/falling analogue characteristic curve can also be set via pin 5.

Schematische Darstellung eines Ultraschallsensor. Es wird ein Teach-in einer Analogkennlinie bzw. eines Fensters mit zwei Schaltpunkten dargestellt. — Teach-in of an analogue characteristic or a window with two switching points

permits the simultaneous use of multiple mic sensors in an application. To avoid mutual interference, the sensors can be synchronised with one another. To do this, all the sensors are electrically connected on pin 5.

If more than 10 sensors need to be synchronised, this can be carried out with the SyncBox1 , which is available as an accessory.

optionally permits the extensive parameterisation of mic sensors. The LCA-2 LinkControl adapter, which is available as an accessory, can be used to connect mic sensors to the PC.