wms sensors are ideal for customer-driven signal evaluation.
0.25 m
0.35 m
1.3 m
3.4 m
6.0 m
The sensor matrix gives an overview of standard sensors from wms family. Make your choice based on operating range and available outputs and click in the matrix.
0.25 m0.35 m1.3 m3.4 m6.0 m
require connection to the customer's own control and signal evaluation equipment.
to a self-contained sensor when the sensor must be controlled by the customer's system. A microprocessor control is normally required for this.
briefly has to be set to -UB by the control unit via an open-collector circuit. As a result, an the wms sensor emits a sound pulse for the time of this signal.
subsequently transmits all echo signals received depending on their duration as 1 bit values (echo yes/no). This takes between 8 and 65 ms depending on the type of sensor. The positive-switched (pnp) output can be loaded with 10 mA. The computation of the distance and subsequent processing is carried out in the customer's control system.
will be happy to assist you in integrating a wms sensor into your control system.
With us, you can easily find an individual solution. Let us talk about your application: +49 231 97 51 51-82.
