Auf dem Foto sind die druckfesten hps+ Füllstandssensoren mit PTFE-Folie in den vier verschiedenen Tastweiten zu sehen.

hps+

hps+ in safety gear - When you need chemically resistant, pressure-resistant sensors.

Detection ranges

0.25 m
0.35 m
1.3 m
3.4 m

Outputs

Process connection:

Download sensor details Sensor matrix

Highlights

Optionally used in normal pressure or overpressure
PTFE membrane for protection against aggressive media
Stainless-steel or optional PVDF housing for hps+340 for use in the food industry
Sealed against the housing with an O-ring made from FFKM for the highest possible chemical resistance
Digital display with direct measured value output in mm/cm or %
Numeric configuration of the sensor using digital display
UL Listed to Canadian and US safety standards

Basics

2 switching outputs in pnp variant
Analogue output plus 1 pnp switching output
4 detection ranges with a measurement range of 30 mm to 8 m
microsonic Teach-in using T1 or T2 buttons
0.025 mm to 2.4 mm resolution
Temperature compensation
9–30 V operating voltage
LinkControlfor configuration of sensors from a PC

Sensor matrix

The sensor matrix gives an overview of standard sensors from hps+ family. Make your choice based on operating range and available outputs and click in the matrix.

0.25 m

0.35 m

1.3 m

3.4 m

2 Schaltausgaenge

2 x pnpEdelstahlhps+25/DD/TC/E/G1

2 x pnpEdelstahlhps+35/DD/TC/E/G1

2 x pnpEdelstahlhps+130/DD/TC/E/G1

1 Analog + 1 Schaltausgang

1 x analog 4-20 mA, 1 x pnpEdelstahlhps+25/DIU/TC/E/G1

1 x analog 4-20 mA, 1 x pnpEdelstahlhps+35/DIU/TC/E/G1

1 x analog 4-20 mA, 1 x pnpEdelstahlhps+130/DIU/TC/E/G1

2 Schaltausgaenge

2 x pnp

1 Analog + 1 Schaltausgang

1 x analog 4-20 mA 1 x pnp

the ultrasonic transducers of the new hps+ sensors are now fitted out - as standard - with a PTFE film. It is sealed with a FFKM O-ring against the housing made of 1.4571 stainless steel or PVDF. This ensures a high degree of resistance to aggressive media.

Foto von der Füllstandmessung in Tanks — Fill level measurement in tanks

Links: hps+340 Ultraschall-Füllstandssensoren im hochresistenten PVDF-Gehäuse Rechts: PTFE-Schutzfolie mit einem O-Ring aus FFKM gegen das Gehäuse abgedichtet — hps+340 in highly resistant PVDF housing - PTFE protective film sealed with an O-ring made from FFKM against the housing

The hps+ sensors can be used for fill level measurement under normal pressure or in tanks and containers with an overpressure of up to 6 bar. Its special software filters also allow its use in containers filled from above or that have a stirring system. Pressure-tight installation in a tank is undertaken by means of a 1“ threaded flange or a 2“ one in the case of hps+340.

and seal tightness were tested through being stored over cellulose thinner and 1,000,000 alternating pressure stresses. Cellulose thinner is extremely corrosive and has a high rate of penetration.

are available for four detection ranges:

Symbolische Darstellung 2 Schaltausgänge

2 switching outputs in pnp switching technology

Symbolische Darstellung 1 Analogausgang mit einem zusätzlichen pnp-Schaltausgang

1 analogue output with an additional pnp switching output

Single switching point
Two-way reflective barrier
Window mode

always show the current state of the switching outputs or the analogue output.

all configuration can be done right at the sensor. The easily legible three-digit LED display continually shows the current distance value and automatically switches between millimetre and centimetre displays.

can optionally be carried out by numeric input of the desired distance values, or using a Teach-in procedure. This permits the user to select the configuration method preferred. The hps+ sensors support synchronisation and multiplex operation and have extensive parameterisation options via LinkControl. (Further information on how to set up hps+ sensors can be found at mic+ sensors.)

consists of the LinkControl-Adapter LCA-2 and the LinkControl-Software and facilitates the configuration of the hps+ sensors via a PC or laptop with any conventional conventional Windows® operating system.