dbk-4/CD/O/QP E+S
-
1 x pnp
papers with weights of 20 - 1,200 g/m2, metal-laminated sheets and films up to 0.4 mm thick, self-adhesive films, sheet metals up to 0.3 mm thick, fine corrugated card
cuboidal
double sheet control
receiver cuboidal
lateral sound exit
lateral sound exit
pulse operation with amplitude evaluation
400 kHz
7 mm in front of transmitter and receiver
20 - 30 V d.c., reverse polarity protection
± 10 %
≤ 35 mA
2 m PVC cable, 4 x 0.34 mm2
at the receiver: 1.2 m PVC cable, at the transmitter: 1 m PVC cable with 2-pin plug IP 20
double sheet output
pnp: Imax = 500 mA (UB-2V)
NCC, short-circuit-proof
pnp: Imax = 500 mA (UB-2V)
NCC, short-circuit-proof
6.5 ms in trigger mode, 24,5 ms in free-run mode
If the control input is pulled against +UB or -UB (UE < 0.1 x UB or UE > 0.9 x UB), then the dbk is deactivated; the switched output state before deactivation is frozen. The effect of the control input being triggered (0.3 x UB < UE < 0.7 x UB (IE ≤ 100 µs) or the control input being opened is for the dbk to start its measurements at a 6.5 ms response time (trigger mode).
The dbk continues to measure (free-run mode) at a 6.5 ms response time should it not again be deactivated. After 500 ms the response time in the free-run mode goes down to 24.5 ms and stays there.
The dbk continues to measure (free-run mode) at a 6.5 ms response time should it not again be deactivated. After 500 ms the response time in the free-run mode goes down to 24.5 ms and stays there.
control input
40 mm ± 3 mm
± 45° from the perpendicular to the sheet
ABS
polyurethane foam, epoxy resin with glass contents
IP 65
+5°C to +60°C
-40°C to +85°C
310 g
not necessary
not necessary
1 x Duo-LED; green: working / red: double sheet
receiver cuboidal
lateral sound exit
lateral sound exit