The design of the wash-down stainless steel housing with no crevices and dirt edges makes pms sensor perfectly suited to intensive cleaning and disinfection.
0.025 mm to 0.10 mm, depending on the analogue window
± 0.15 %
± 1 % (temperature drift internally compensated)
9 - 30 V d.c., reverse polarity protection
± 10 %
≤ 80 mA
5-pin M12 initiator plug
analogue output current: 4-20 mA / voltage: 0-10 V (at UB ≥ 15 V), short-circuit-proof switchable rising/falling
32 ms
< 300 ms
com input synchronisation input
stainless steel, plastic parts: PBT, TPU
polyurethane foam, epoxy resin with glass contents
IP 67
-25°C to +70°C
-40°C to +85°C
150 g
cable connection (on request)
yes
2 push-buttons + LED display (TouchControl)
Teach-in and numeric configuration via TouchControl LCA-2 with LinkControl
yes
yes
3-digit LED display, 2 x three-colour LED
stainless steel version Display UL Listed
accessories
LCA-2
For the convenient setting of a large number of microsonic sensor families. The LinkControl-Adapter LCA-2 can be used to read, copy or write parameters. ...
LCA-2 Koffer
Set for convenient setting of a number of microsonic sensor families. Contents: LCA-2 - Adaptor for sensors with cable connection (lcs) ...
UF-90/M30
beam detector for sensors with M30 threaded sleeve and ≤ 1.3 m detection range
BF-30
fastening clamp for sensors with M30 threaded sleeve
SyncBox1
For the external synchronization of more than 10 mic+ sensors. The SyncBox1 allows synchronization of up to 160 mic+ sensors.