Sensorbild - Matrix

개요

LCA-2는 많은 종류의 마이크로소닉 센서 군들의 간편한 셋팅을 용이하게 합니다.

센서 라인에 관하여 pdf로 다운 받으세요

하이라이트

  • Three-digit digital display for the display of measured distance values in mm or cm
  • TeachBox with four-button operation for programming of the sensor without a PC
  • LinkCopy function for copying the sensor settings from one sensor to another without a PC
  • Uniform microsonic teach-in for all microsonic sensors to keep easy things easy

Basics

  • Handy adapter for the programming of ultrasonic sensors
  • USB interface for connection to a PC
  • T plug to insert the adapter between the connector cable and the sensor
  • LinkControl software free download of the current version on the Internet
  • Backwards-compatible so sensors that have been in the field for a long time can still be programmed
  • Future-proof since the LinkControl adapter will also support future generations of sensors

특성

링크콘트롤 아답타 LCA-2

링크콘트롤 아답타 LCA-2는 PC또는 랩탑에 연결하기 위해 USB 인터페이스를 채용했습니다.

링크 콘트롤 소프트웨어

mic+, mic, pico+, lpc+, lcs+, lcs, ucs, pico+TF, crm+, hps+, pms, bks+, bks, dbk+, esp, esf 시리즈 초음파 센서들을 링크 콘트롤 소프트 웨어와 함께 윈도우환경에서 사용합니다.

링크콘트롤 소프트웨어 입력 마스크

현재측정값

링크콘트롤 소프트웨어내의 세가지의 다른 출력 그래픽 폼내에서 초음파센서의 현재측정값을 그래픽화하여 볼수있습니다.

링크 콘트롤 소프트웨어 측정 플로터

The LinkCopy function

링크카피 기능으로 센서로부터 LCA-2에 파라메타의 다운로드 그리고 다른센서 이들 파라메타의 업로드를 합니다. 이 방법으로 하나의 센서로부터 다른 센서들을 편리하게 세팅 할 수 있습니다.

PC연결을 위한 USB 인터페이스

오프라인 프로그램밍 링크카피

어떤 센서 시리즈들은 오프라인에서 링크카피를 사용해 센서에 세팅 된 카피를 직접 LCA-2에서 표시하고 센서 내에 먼저 기록된 내용을 표시기를 통해 수정할 수 있습니다.

링크 카피 기능을 위해 링크카피 아답타를 PC에 직접 연결이 불필요합니다. LCA - 2가 센서의 파라메타를 읽고 내부의 EEPROM에 그들을 저장합니다. 링크 콘트롤 아답타에 전원을 차단 후에도 센서의 기록 보관장소에 당연히 데이터가 안전하게 저장됩니다.

링크카피: 센서 세팅의 카피중

지능화된 티치박스를 통해

링크 카피 기능을 위해 링크카피 아답타를 PC에 직접 연결이 불필요합니다. LCA - 2가 센서의 파라메타를 읽고 내부의 EEPROM에 그들을 저장합니다. 지능화된 티치박스를 통해 모든 초음파센서 센서 콘넥터 5번 핀을 통해 연결되(mic,lcs와lpc+시리즈) 편리하게 세트 할 수 있습니다. 링크콘트롤 아답타 LCA-2는 센서 연결라인과센서 사이에 루프이며 PC 또는 랩탑이 필요하지 않습니다. T1 과 T2버튼을 통해 티치인을 하는 동안 버튼의 스토로크의 길이는 표시기의 초 단위로 표시된다.

티치박스와 링크카피

Which sensor families support LinkControl and LinkCopy?

Cylindrical Sensors


Link­Control Link­Copy
mic+ + +
mic + +
wms - -
crm+ + +
hps+ + +
pico+TF + +
pico+ + +
pico+/F/A + -
lpc+ + -
nano - -
nero - -
Valid from version LinkControl (Rev. A)

Cubic Sensors


Link­Control Link­Copy
lcs + +
lcs+ + +
sks - -
ucs + +
zws - -

Special Sensors

bks + +
bks+ + +
dbk+ + -
esf + -
esp + -
ews - -
pms + +
  • lca2_1046x850.jpg
    Get the current LinkControl software! Version 8.1
    This version supplies our new sensors: pms, pico+, pico+TF, lcs+, dbk+, hps+, esp-4, esf-1/xx/yy/A and bks+. For an update we recommend to delete the existing LinkControl software under Windows beforehand.

    Download LinkControl Software 8.1.0.0
Top